Why Prefab Metal Buildings are the Preference for Businesses

Why Metal Buildings are the Best Choice for any store

It’s no secret that prefab metal buildings are the future in terms of brick-and-mortar business establishments. With nearly 80% of all new business construction projects being metal-based, more and more companies are taking advantage of the vast benefits steel has to offer. It’s a simple, cost-effective means to get your business off the ground with none of the headaches found in traditional building styles.

Wooden buildings have been a building staple for many generations, but they’re rigid, cumbersome, and come with a host of troubles not found in newer construction types. Contemporary wooden buildings can take months, if not years to erect, but commercial metal buildings can be assembled in mere days. There’s a reason superstores like Walmart, Costco, and Target have chosen steel structures as their go-to building solutions.  

They are also built to last for decades and offer substantially more protection from harsh weather than the competition. Wooden structures are not known for holding up well to the forces of Mother Nature. Steel naturally flexes when faced with outer forces like wind, rain, and seismic activity, giving it the natural ability to withstand forces that would bring other construction types like wood or concrete to the ground. This is why many large bridges and infrastructural elements are constructed from steel.

And who doesn’t want to save the environment? Steel is 100% recyclable and a much easier resource to cultivate compared to wood. By choosing steel as your next building material, you’ll do your part to reduce your carbon footprint, save trees from the axe, and help reduce the over impacts of climate change.

Cost-Saving Advantages Commercial Metal Buildings Provide

Metal buildings possess far more qualities than just sheer good looks! Choosing to construct your business out of metal comes with a ton of extra benefits, with one of the most significant being the weight of your wallet. Custom metal buildings are considerably less expensive than traditional stick-built structures. And that’s just in terms of construction costs! But what about after the ribbon cut? Steel buildings require substantially less upkeep throughout their life, saving you money year after year on maintenance costs.

Steel buildings are forged from galvanized steel, making them resistant to rust, water damage, and pest infiltration. Wood burrowing insects like termites and carpenter bees are a non-issue with metal buildings.

What Types of Businesses Use Commercial Metal Buildings

Metal buildings aren’t just for carports, garages, or barns anymore! These structures are efficient, sturdy, and ready to take on just about anything you can throw at it! There are many types of businesses where metal excels over traditional building methods.

Offices

A prefabricated metal building is a fantastic choice when constructing office spaces. With the power and versatility of steel, you can pick a set of dimensions that works for your company size and design a customized workspace that fits all your needs.

Agricultural and Farm Buildings

Steel buildings are perfect for farmers hoping to find a long-lasting solution for housing their livestock. But that’s not the only use metal structures have to offer the farm! Metal buildings are perfect for both heavy equipment storage and protecting crops like corn or grain from the elements. Steel buildings even make great finished farmhouses!

Commercial Workshops

Steel buildings are naturally resistant to fire damage, making them an excellent choice for glassblowers, welders, metal workers, and any business that operates in hot, fire-prone environments. If you hope to open a garage, welding shop, or a mill,  metal buildings are the right way to go!

Manufacturing Plants

Factories have long had the right idea to use metal buildings! When handling heavy, specialized equipment, it pays to have a facility that can quickly adapt to your needs. Metal structures possess this in spades. Additionally, clear span-style metal buildings offer tons of open square footage, giving your company ample room to prosper.

Commercial Aircraft Hangars

Much like the manufacturing sector, steel and metal structures have been a regular presence for decades. And for a good reason! By providing an abundance of available square footage to match the lengthy wingspans of most aircraft, metal buildings make perfect commercial aircraft hangars, giving owners ample room to taxi to their heart’s delight.

Restaurants

Unlike the others, most people won’t immediately think of metal buildings when it comes to their favorite eatery. But why not? Customizable metal buildings provide a spectacularly efficient means to build a restaurant. Steel structures offer plenty of dining room and kitchen square footage, as well as ample room for additional storage. And once finished, a restaurant can be designed to match any visual aesthetic.

Warehouses

Warehouses all require tons of open space to operate efficiently, and metal buildings provide that with ease! Clear span metal structures offer an incredible amount of open space, sometimes nearly matching the square footage of the entire building footprint. For warehouses that need ample storage room, steel buildings are the prime choice.

Conclusion

By now, the advantages of choosing to construct your next retail, office, or manufacturing space from steel should be so evident that you’ve stopped reading this piece and picked up a phone to start the design process with a representative. Metal structures provide the streamlined construction and versatility to get your business up and running in no time! Whether you operate a storefront, a business office, or a factory, metal is one the best ways to save you time, money, and stress.

And the benefits won’t end after construction is completed! You’ll continue to save untold sums in terms of repair, maintenance, and general upkeep costs compared to similarly sized stick-built buildings. Wood frames and shingles simply won’t ever size up to the sheer might of American galvanized steel. They can’t compete in terms of resistance to the elements, and they won’t ever beat the longevity steel provides.

Did you miss our previous article…
https://www.beyondcorporatehouse.com/?p=298

DIY Upholstery Tips for Beginners

Have you got some beloved furniture that you just can’t bring yourself to throw away? Whether it’s an old chair that needs a new seat, or you’d like to give a piece of furniture a bit of a revamp, having a go at DIY upholstery could be your best bet.

However, if you’re new to the upholstery world you might not know where to begin. This article will go over some of the top tips for DIY upholstery to help you make a start on your new project. From which upholstery nails to choose from to checking the inside of your furniture, here’s everything you need to know about upholstery before you start.

Get your tools right:

The first tip may be one of the most important, as without the right tools, there’s no way you could do a decent job! Having the correct tools will not only make your life easier, but the finished product will also thank you for it. Your final results will go from amateur-looking to professional level! Here are the most important tools to get right:

Upholstery gun: There are three different types of upholstery guns, the most popular being the pneumatic staple gun. This type will make the job much easier and quicker, so don’t just go for the cheapest option, as you might regret it!Upholstery nails: You can choose from a range of upholstery nails to add a final touch to your product. Not only can these disguise any staples on show, but they can be used as decoration to give the furniture a certain look or style. You’ll need a hammer for this!Fabric scissors: Good quality fabric scissors are essential for getting straight lines and avoiding tearing to the fabric.Marker: You can use anything from chalk to a pencil to mark where you want to cut the fabric, this will help you make more accurate measurements.Staple remover: For all beginners, you’re bound to make a couple of mistakes. Having a staple remover on hand will allow you to fix those errors swiftly.

Don’t forget the inside

When you first start upholstering, you only want to focus on updating the outside. With this in mind, you need to check to make sure the insides are in good condition. If not, this will be a job for a professional. 

You can check the insides are working correctly by testing how sturdy and solid it feels when you sit on the furniture piece. If it feels rock hard or you sink deep into the seat, these are signs that there are a few problems that need fixing and you should leave that piece to someone who knows what they’re doing!

Be picky with fabrics

You don’t want to put loads of effort into upholstering a piece of furniture for the fabric to only last a couple of months (or to rip whilst you’re working on it!). If you choose a fabric that won’t tear easily and is heavy-duty to withstand years of rubbing, you could give the chair or sofa a new lease of life for years to come.

Thin fabrics might be cheap, but you’ll just have to re-do the covering not long after! Heavy hemp fabrics and cotton twill or denim are all good choices for long-lasting upholstery.

Start small

It’s great to be optimistic, but if it’s your first time trying to reupholster a piece of furniture, it’s probably not the best idea to start with something expensive, large, or pieces that are important to you. It’s best to get your practice in first until you feel confident enough to tackle larger projects.

You don’t want to start with a large piece of furniture as this might be so difficult that it puts you off upholstering for a long time. Have a go with something small like a footstool as your first attempt to get yourself comfortable with the process. Buying something cheap will also put the pressure off getting it right first time, that way you can have more fun with it and any mistakes won’t be a big deal.

Practice makes perfect!

As with anything, skills take time to develop and the more time you give to it, the better you will get. Follow these top tips when tackling your first upholstery project and you should feel confident enough to make a start.

Did you miss our previous article…
https://www.beyondcorporatehouse.com/?p=173

Learning to Fix Your Own Water Heater

Having hot water is one of the most vital resources a homeowner can have. Taking showers, doing dishes, and washing clothes all require this valuable commodity.

Water heaters can malfunction at any time with no warning. Learning to troubleshoot problems with your water heater can be a lifesaver.

If you’re unfamiliar with how to navigate your water heaters system, it’s okay. We’ve got a guide on learning how to fix your water heater. 

Troubleshooting Your Water Heater

Listed below are some of the most common problems you can encounter with your water heater. Keep reading to find out simple solutions for these problems.

Thermostat Issues

If the water in your sink or tub is too hot or too cold, there could be a thermostat problem. Testing the thermostat with a voltage meter can let you know if the component is faulty.

Dripping Valves

Does the hot water in your home not last long enough? This could be a problem with dripping valves or fixtures.

Use a wrench and check all the connections on the pipes and hoses around the water heater. Ensure everything is tight and locked correctly.

Puddles Under the Water Heater

You may have found a puddle of water under the heater unit. Is it a leak or just condensation?

If you’ve recently installed a new water heater, condensation is present on many newer models. Monitor your water heater as it turns on.

Condensation tends to build up after the first few minutes a water heater turns on. Approximately one half-gallon of vapor can form from the unit powering on. 

Winterising

Is your water heater freezing when the temperatures get cold outside? Frozen water heaters can cause severe malfunctions. 

The heater may require extra insulation around the main unit. If this doesn’t seem to help, consider purchasing insulation for your pipes. 

Recognise and Diagnose

Pay attention to how your water heater functions. Get familiar with the noises it makes and the cycles it goes through. This ensures your ability to notice small changes that could lead to bigger problems later. 

 

If you simply can’t fix it yourself, consider investing in a brand new water heater from your local plumber

Did you miss our previous article…
https://www.beyondcorporatehouse.com/?p=149

4 Mistakes to Avoid When Moving to A New House

Moving into a new home can be overwhelming, especially because you already have other significant responsibilities. It is common to make mistakes, but the fewer errors you make, the more pleasant and easy your move will be. It also helps in keeping the costs low during the entire process. When you are aware of the mistakes you need to avoid the next time you make your move, you will have a better experience. The following is a list of common mistakes to avoid when you are moving.

Last-minute packing

If you want to have all your things packed for the move, last-minute packing is not the way to go about it. To be adequately prepared, you will need to start arranging and organizing your belongings about a month in advance. Otherwise, you will get frustrated and overwhelmed. The last days should only be for putting in the final touches. 

If you want to have an easier transition, you should consider hiring a professional moving company Holland Movers. They will offer you expert packaging materials and services, which will also give you peace of mind.

Failing to set the correct budget

Developing a budget estimate is essential even though it is impossible to anticipate precisely how much it will cost for the entire moving process. Avoid the mistake most people make of abandoning your budget altogether. Having it will help you plan and know how much you’ll need. It will also mitigate the shock and unpleasantries that come with unexpected financial burdens.

Inadequate research 

There are a lot of moving companies available in the market. However, they don’t offer the same quality of services. So, to settle on the right company, you will need to do adequate research, and thankfully, there are many online resources at your disposal. Look up different companies, and don’t forget to read reviews and referrals from customers. Additionally, you could also ask for the estimates and forward any queries to the Moving Company Amsterdam

If you fail to do the due diligence and settle on the first company that comes up, you will be taking a significant risk. Such a mistake might cost you extra money and loss or damage to your belongings. Doing adequate research will also give you the chance to compare rates from different companies. 

Allocating too much time

 Don’t make the mistake of starting to pack too early. Apart from unnecessarily prolonging the process, you will also likely pack up things you need to use before moving. Having to unpack already packaged boxes will also result in disorganization and misplacing items.

Your move does not have to be challenging, nor should it become a hectic, burdensome task. Preparing adequately by taking the proper steps will come in handy. Always remember that unexpected things might come up regardless of the task at hand. It means that although it will help to have a budget and a plan for the entire process, some things will be out of your control. It will be helpful to take everything in good stride.

Did you miss our previous article…
https://www.beyondcorporatehouse.com/?p=119

What Are The 3 Different Types Of Generators?

Electric generators are considered to be lifesavers. They are backup power sources that convert fuel supply—usually propane, diesel, or gasoline, into electrical energy. They are the primary sources of electrical supply during power outages. This energy is used in an external circuit. Unlike standby generators, the following are not permanently installed in one place, so they’re easy to start.

There are three main types of generators: portable, inverter, and standby. Despite their differences, all these generators should undergo similar generator maintenance to ensure long-term usability, and similar safety precautions should be taken to reduce the hazards posed by their operation. You can find a good inverter generator at Sydney Tools. Let’s now see, what are the 3 different types of generators.

Portable Generator:

A portable generator is powered by gas or diesel fuel and is used to provide temporary electrical power. One of the characteristics of the portable generator is that it can use a combustion engine to conduct electricity. Also, It can be easily plugged into electrical appliances or tools via its sockets. It can be wired into a facility’s subpanels. It can be used on remote sites. It has enough power to run a television, freezer, and refrigerator. The engine should run at 3600 rpm to render the standard 60hz of current. Use a governor to control the engine’s speed. It can also power tools and lights.

Inverter Generator:

An inverter generator uses an engine connected to an alternator to produce AC power. It also uses a rectifier unlike other generators to convert the AC power into DC power. Some of the characteristics of Inverter generator are:- It relies on high-tech magnets. Uses advanced electronic circuitry. Undergoes three phases to produce electricity. Outputs AC current converts it to DC current and finally inverts it to AC. Maintains a constant flowing of current to an appliance. Is more energy-efficient, as the engine speed adjusts itself according to how much power is needed. Its AC can be set to any voltage and frequency when used with proper equipment. Tends to be belittled and is lightweight. Can fit into a car, RV, or boat.

Standby Generator:

A standby generator is an electrical system that operates with an automatic transfer switch that commands it to power a device up during power loss. Here are some characteristics to note about these types of generators: Operates automatically. Delivers permanent power protection. Has two components: a standby generator and an automatic transfer switch.Can operate on liquid propane or natural gas.Will run on the fuel type already in use in the facility or home. Uses an internal combustion engine. Senses the power loss within seconds and boots up electricity so that power loss is felt very briefly. Executes automatic weekly self-tests to see that it is properly reacting to a power loss. Is constantly monitoring utility power. Used in safety systems for elevators, standby lighting, medical and life support equipment, and fire protection systems.

A routine maintenance practice is that of general inspection. It is important to inspect the oil as well, as it must be changed regularly. Oil change frequency depends on the manufacturer, how often the generator is used, and your work environment.

Did you miss our previous article…
https://www.beyondcorporatehouse.com/?p=91

Why Choose Solar Installers?

solar installersSolar installers are skilled specialists who install solar energy panels on homes, businesses, and other structures. Install solar panel systems must comply with state and federal laws, building designs, and engineering specifications. All forms must comply with local and national environmental standards for water, energy, noise, and heat. Not only must solar panels meet national and local codes but also be designed for maximum efficiency. Solar Guys can help guide the construction process, providing industry and government agencies inputs to ensure the highest efficiency and lowest cost.

There are two types of solar energy panels – hot and passive. PV installers use the terms interchangeably due to the shared usage of photovoltaic cells. PV cells are individual light-based electric devices that convert sunlight into electricity. The installed panels are composed of several PV cells, which each perform distinct functions such as light absorption, thermal expansion, etc… PV panels also include support structures and wiring.

As mentioned previously, PV installers may work either individually or in teams to complete installation projects. One group may specialize in building hot-water solar panels. Other team members may work on cold-water panels. The installation process depends on the type of panel being built. It is important to hire experienced solar photovoltaic installers to ensure quality and safety of the installation process. To ensure maximum safety, the installation team must undergo extensive training in the installation processes and work according to a schedule.

The team of PV installers must consist of competent professionals who can build and install solar panels. Before an installation begins, the solar installer will create a detailed plan for the entire project. The detailed plan will include all necessary measurements and details about the material, labor, equipment, and tools to be used during the process. The photovoltaic installation team may choose to use any number of different software programs to assist them in the process. There are many computer programs available to help PV installers and technicians in the process of building and installing photovoltaic panels.

The installation process typically includes placing individual photovoltaic panels into a specific frame or structure. The entire system is then connected together after the panels have been placed. The entire process typically takes one to three days to complete. This is the reason why it is often advised that solar installers hire technicians to complete the task.

One of the main reasons why the installation process can take one to three days is because the solar installer must decide how much sunlight the solar panels require to function properly. There are many factors involved with determining this number, including how much sunlight the panel can receive and what the maximum temperature is where the panels will be placed. The solar design used is also another factor that must be considered. The design allows for as much sun exposure as needed without causing overheating or other problems. By using the proper technology and having the right planning, the solar installer can ensure the panels get the optimal amount of sunlight needed to work properly.

There are several steps involved when solar panels are being installed. These include laying the photovoltaic energy panels in an area where they will receive the appropriate amount of sunlight. There are typically support structures for the panels that must be used before the actual installation can begin. These support structures help to keep the panels in place and prevent them from moving, which would reduce the amount of time the installation took.

Solar energy systems are becoming increasingly more popular as people become aware of the impact their actions have on the environment. It is becoming increasingly easier to implement a solar panel system for residential use because it does not involve building anything new. Instead, the purchaser simply needs to find a company that specializes in this type of system and has years of experience in installing solar panels. The installer then takes over by providing the knowledge and expertise needed to successfully install the system. A professional installer can help to ensure that the entire project is completed in a timely manner.

What Is the Best Method of Foundation Repair in Springfield IL?

When your home needs foundation repair in Springfield, IL, it’s vital that you schedule this work as soon as possible. The longer you ignore foundation cracks, chips, spalling, and other foundation issues, the more extensive and costly that damage becomes, and the higher the risk of secondary damage inside and outside the home. This secondary damage includes wall and ceiling cracks, buckled floors, roof cracks, damaged plumbing fixtures, and doors and windows that don’t operate as they should.

A foundation repair contractor is the best choice for advising you on the right foundation repair method for your home, but it’s still helpful to know a bit more about your options and when they’re needed. You can then also know more about what to expect throughout the process and how long that foundation repair in Springfield should last!

Patching and Minor Foundation Repair in Springfield IL

At the first sign of cracks and chips, it’s time to schedule patching and other minor foundation repair for a Springfield IL home. Epoxy sealers and fillers are designed to expand inside a crack and then harden and adhere to the materials around them, blocking moisture and preventing that crack from expanding.

Professional patching is an excellent choice for avoiding more extensive foundation damage down the road, but note that the materials degrade over time. You might need to refill those cracks every 5 to 10 years, to ensure the epoxy is in good condition and still filling the cracks as it should. Added waterproofing can extend the life of those fillers and help avoid further foundation damage.

Shimming, for Pier and Beam Foundation Repair in Springfield IL

A shim is a tapered wedge, pounded between two structural pieces to provide added support against weight and cracking. Shims are used in a variety of places around a home; for example, you might pound shims between floorboards and the floor joists, to add support to the flooring and prevent sagging and squeaking.

Shimming is a good way to provide support for pier and beam foundations. If the beams begin to sag and weaken, placing shims between those beams and the piers under them can prevent added breakage. Your foundation repair contractor might then also make additional repairs, such as patching cracks or waterproofing the crawlspace, or might recommend adding a dehumidifier, to keep the space dry.

What Is Underpinning and When Is It Needed?

Underpinning or pier insertion is needed for severely damaged foundations, and to provide support to a foundation if you’ll be adding weight to a house. Underpinning means inserting a steel pin into the ground, next to or even directly under the foundation. The pin is then attached to the foundation concrete, helping keep it in place and closing up cracks and other damage.

Pier insertion is excellent for properties with shifting soil, as the pin will help keep the foundation in place even when the soil is not stable and strong. Underpinning is also a good choice for structures that have settled or sunk along one side, providing support for the foundation where it’s needed.

What Is House Leveling and When Is It Needed?

House leveling, also called slab jacking or mud jacking, is often used along with underpinning or other foundation repair methods. House leveling is needed if your home has settled, shifted, and then sunk along one side or the other.

During the house leveling process, a specialty slurry is injected underneath the sunken or damaged foundation. This slurry dries and expands slightly, lifting the structure back to a level and even position and keeping it stable and secure.

House leveling not only corrects foundation damage but can also close up cracks along interior and exterior walls and ceilings, making repairs to these surfaces easier and more permanent. Slab jacking is also used for properties with shifting soil, as this helps keep the structure secure over the years.

Basement Foundation Repair in Springfield IL

When basement walls weaken, they might begin to bow inward. This signals that it’s time for immediate fixes, as those walls can crack and even collapse, risking injury to anyone in the vicinity and exposing your home to the elements.

Most foundation repair contractors will suggest carbon fiber straps for bowing basement walls. These straps are placed along the walls and then fastened and tightened in place. The straps will help return the walls to a level position while also providing strength and support.

Basement waterproofing is also an excellent choice for preventing foundation damage and otherwise unnecessary foundation repair in Springfield IL. Waterproof coatings protect against damage, or your home might need a dehumidifier or sump pump installation. Not only will waterproofing help protect against foundation damage but it’s also vital if you plan on finishing the space or use it for storage, as excess moisture can mean damaged building materials and mold growth!

Corporate House Style Options

corporate house

Corporate housekeeping refers to the management and oversight of commercial properties and their associated personnel. It can also be referred to as property management. A corporate housekeeper’s duties may include cleaning, vacuuming, dusting, laundry, repairing small appliances, and light cleaning. The company conducting the property maintenance is generally known as the property master.

 

What are the benefits of using corporate housing options instead of hotel room rental? Corporate housing is a flexible term in the moving industry that suggests renting an apartment, condominium, or house temporarily, usually to people, military members, interns, or large companies, as an alternative to an extended stay hotel or even an ordinary hotel room. Most corporate housing options are available on short notice and maybe booked up within minutes. This gives people all the flexibility they need to plan their travel properly.

 

Another advantage of going with corporate housing options is convenience. Rather than drive all around the city looking for a hotel room, they stay where they are booked and use the services of a local property management company to show them the location of the property. When these properties are fully furnished, they include a fully furnished kitchen, fully equipped bedrooms, living areas, cable, internet, and other amenities of a modern hotel. They may also come complete with private transportation.

 

Property management businesses can provide fast, efficient service as well as a professional approach. For example, a large corporate house report notes that when using Airbnb rentals, the business owners get a minimum of two days of clean, unoccupied accommodations. This means no more late fees or having to pay to have someone overnight.

 

One drawback to using airline accommodation when on a large corporate retreat is the price. Many of these corporate apartments are quite pricey, with many going as high as twenty-five thousand dollars or more for a small apartment. However, many business owners can get great deals because they book well in advance and are flexible with dates.

 

The alternative for many companies is often a comfortable home away from home, but it has its disadvantages. Many companies find it difficult to schedule hotel room times for their traveling employees because of the costs associated with maintaining a home-away-from-home environment. Hotel room rates are based on several factors, including the nightly rate and the morning, afternoon, and evening rates. When a company uses corporate housing accommodations, they have access to all the benefits of having a hotel room without the costs.

 

Most corporate houses provide fully furnished rooms, but some do charge for extras. This can include access to a kitchen, laundry facilities, and transportation to nearby attractions. Companies should evaluate what extras are most important to them and then shop around for fully furnished options. They should also ask about any special requests that may be needed with fully furnished corporate houses. Some companies can upgrade features at a later date.

 

There are also a few completely furnished housing communities that are becoming extremely popular. Many of these are actually apartments, but there is usually a clubhouse and/or parking garage. Some have gym access and are only two to three blocks from the corporate housing community. These are typically called AirbnBeds. While AirBNBeds have some advantages over fully furnished housing, they are not as long term or as attractive as the short-stay hotel room alternatives.

 

One corporation that has recently launched an entirely furnished home is ZEUS Lifestyle Communities. This is the business housing option that is actually on the property. ZEUS is part of the Starwood/Glenwood Group and is one of the largest home parks in the country. The homes here range in price from about six thousand dollars to about fifteen thousand. Most of the Zeus living complexes and houses are actually located on four acres of luxurious real estate and are located in the heart of Palm Springs.

 

Most people who decide on this option are looking for a relatively short-term investment. They can lease the property for a period of years, and if they wish, they can buy it and return it to the park after the lease has expired. It is not unusual for these buyers to stay in the home for five or six years and then purchase a new fully furnished condo in the same area. This leaves them free to move when the time is right.

 

There are other reasons that corporations will choose to rent out their entire facility rather than purchase their own business apartment. Oftentimes, corporate housing tends to have many advantages over single-family homes or apartments. Many corporate apartments offer several restaurants and clubs, gyms, swimming pools, tennis courts, in-house laundry facilities, fitness centers, and other amenities. While a person can spend several hundred dollars a month in these areas, they can spend thousands or even tens of thousands of dollars in the larger cities. For that reason, they are rarely left without a car. A person going on a business trip usually takes their car with them, which is another advantage that makes corporate housing an attractive option.